The saxophone (often referred to colloquially as the sax) is a type of single-reed woodwind instrument with a conical body, usually made of brass. As with all single-reed instruments, sound is produced when a reed on a mouthpiece vibrates to produce a sound wave inside the instrument's body. The pitch is controlled by opening and closing holes in the body to change the effective length of the tube. The holes are closed by leather pads attached to keys operated by the player. Saxophones are made in various sizes and are almost always treated as transposing instruments. A person who plays the saxophone is called a saxophonist or saxist.
The saxophone is used in a wide range of musical styles including classical music (such as concert bands, chamber music, solo repertoire, and occasionally orchestras), military bands, marching bands, jazz (such as big bands and jazz combos), and contemporary music. The saxophone is also used as a solo and melody instrument or as a member of a horn section in some styles of rock and roll and popular music.
The saxophone was invented by the Belgian instrument maker Adolphe Sax in the early 1840s and was patented on 28 June 1846. Sax invented two groups of seven instruments each—one group contained instruments in C and F, and the other group contained instruments in B♭ and E♭. The B♭ and E♭ instruments soon became dominant, and most saxophones encountered today are from this series. Instruments from the series pitched in C and F never gained a foothold and constituted only a small fraction of instruments made by Sax. High-pitch (also marked "H" or "HP") saxophones tuned sharper than the (concert) A = 440 Hz standard were produced into the early twentieth century for sonic qualities suited for outdoor use, but are not playable to modern tuning and are considered obsolete. Low-pitch (also marked "L" or "LP") saxophones are equivalent in tuning to modern instruments. C soprano and C melody saxophones were produced for the casual market as parlor instruments during the early twentieth century, and saxophones in F were introduced during the late 1920s but never gained acceptance.
The modern saxophone family consists entirely of B♭ and E♭ instruments. The saxophones in widest use are the B♭ soprano, E♭ alto, B♭ tenor, and E♭ baritone. The E♭ sopranino and B♭ bass saxophone are typically used in larger saxophone choir settings, when available.
Construction[]
The pitch of a saxophone is controlled by opening or closing the tone holes along the body of the instrument to change the length of the vibrating air column. The tone holes are closed by leather pads connected to keys—most are operated by the player's fingers, but some are operated using the palm or the side of a finger. There is an octave key, which raises the pitch of the lower notes by one octave. The lowest note on most modern saxophones is the written B♭ below middle C. Nearly all baritone saxophones are now constructed with an extra key to allow them to play low A, and a small number of altos with a low A key have been manufactured. The highest keyed note has traditionally been the F two and a half octaves above the low B♭, but many instruments now have an extra key for a high F♯, and some modern soprano saxophones even have a high G key. Notes above this are part of the altissimo register and require advanced embouchure techniques and fingering combinations.
Saxophone music is written in treble clef, appropriately transposed for each different type of instrument, and all saxophones use the same key arrangement and fingerings. Therefore any written note corresponds to the same fingering on any saxophone, making it easier for players to switch instruments.
Alto and larger saxophones have a detachable curved neck at the top, and a U-shaped bend (the bow) that turns the tubing upward as it approaches the bell. Soprano and sopranino saxophones are usually constructed without a detachable neck or a bow but some have a small detachable neck and some are shaped like an alto saxophone with a bow section. There are rare examples of alto, tenor, and baritone saxophones with mostly straight bodies. Baritone, bass, and contrabass saxophones have extra bends to accommodate the length of tubing. The fingering system for the saxophone is similar to the systems used for the oboe, the Boehm-system clarinet, and the flute.
Materials[]
From the earliest days of the saxophone the body and key cups have been made from sheet brass stock, which can be worked into complex shapes. The keywork is manufactured from other types of brass stock. King made saxophones with necks and bells of sterling silver from the 1930s into the early 1960s. Yanagisawa revived this idea in the 1980s and later introduced instruments entirely made of sterling silver. Keilwerth and P. Mauriat have used nickel silver, a copper-nickel-zinc alloy more commonly used for flutes, for the bodies of some saxophone models. For visual and tonal effect, higher copper variants of brass are sometimes substituted for the more common "yellow brass" and "cartridge brass." Yanagisawa made its 902 and 992 series saxophones with the high copper alloy phosphor bronze to achieve a darker, more "vintage" tone than the brass 901 and 991 models.
Other materials are used for some mechanical parts and keywork. Buttons where the fingers contact the keys are usually made from plastic or mother of pearl. Rods, screw pins, and springs are usually made of blued or stainless steel. Mechanical buffers of felt, cork, leather, and various synthetic materials are used to minimize mechanical noise from key movement and to optimize the action of the keywork. Nickel silver is sometimes used for hinges for its advantages of mechanical durability, although the most common material for such applications has remained brass.
Manufacturers usually apply a finish to the surface of the instrument's body and keywork. The most common finish is a thin coating of clear or colored acrylic lacquer to protect the brass from oxidation and maintain a shiny appearance. Silver or gold plating are offered as options on some models. Some silver plated saxophones are also lacquered. Plating saxophones with gold is an expensive process because an underplating of silver is required for the gold to adhere to. Nickel plating has been used on the bodies of early budget model saxophones and is commonly used on keywork when a more durable finish is desired, mostly with student model saxophones. Chemical surface treatment of the base metal has come into use as an alternative to the lacquer and plating finishes in recent years.
Mouthpiece and reed[]
The saxophone uses a single-reed mouthpiece similar to that of the clarinet. Each size of saxophone (alto, tenor, etc.) uses a different size of reed and mouthpiece.
Most saxophonists use reeds made from Arundo donax cane, but since the middle of the twentieth century some have been made of fiberglass or other composite materials. Saxophone reeds are proportioned slightly differently from clarinet reeds, being wider for the same length. Commercial reeds vary in hardness and design, and single-reed players try different reeds to find those that suit their mouthpiece, embouchure, and playing style.
Mouthpiece design has a profound impact on tone. Different mouthpiece design characteristics and features tend to be favored for different styles. Early mouthpieces were designed to produce a "warm" and "round" sound for classical playing. Among classical mouthpieces, those with a concave ("excavated") chamber are truer to Adolphe Sax's original design; these provide a softer or less piercing tone favored by the Raschèr school of classical playing. Saxophonists who follow the French school of classical playing, influenced by Marcel Mule, generally use mouthpieces with smaller chambers for a somewhat "brighter" sound with relatively more upper harmonics. The use of the saxophone in dance orchestras and jazz ensembles from the 1920s onward placed emphasis on dynamic range and projection, leading to innovation in mouthpiece designs. At the opposite extreme from the classical mouthpieces are those with a small chamber and a low clearance above the reed between the tip and the chamber, called high baffle. These produce a bright sound with maximum projection, suitable for having a sound stand out among amplified instruments.
Mouthpieces come in a wide variety of materials including vulcanized rubber (sometimes called hard rubber or ebonite), plastic and metals like bronze or surgical steel. Less common materials that have been used include wood, glass, crystal, porcelain and bone. Recently, Delrin has been added to the stock of mouthpiece materials.
The effect of mouthpiece materials on tone of the saxophone has been the subject of much debate. According to Larry Teal, the mouthpiece material has little, if any, effect on the sound, and the physical dimensions give a mouthpiece its tone color. There are examples of "dark" sounding metal pieces and "bright" sounding hard rubber pieces. The extra bulk required near the tip with hard rubber affects mouth position and airflow characteristics.
History[]
Early development and adoption[]
The saxophone was designed around 1840 by Adolphe Sax, a Belgian instrument maker, flautist, and clarinetist. Born in Dinant and originally based in Brussels, he moved to Paris in 1842 to establish his musical instrument business. Before working on the saxophone, he made several improvements to the bass clarinet by improving its keywork and acoustics and extending its lower range. Sax was also a maker of the ophicleide, a large conical brass instrument in the bass register with keys similar to a woodwind instrument. His experience with these two instruments allowed him to develop the skills and technologies needed to make the first saxophones.
As an outgrowth of his work improving the bass clarinet, Sax began developing an instrument with the projection of a brass instrument and the agility of a woodwind. He wanted it to overblow at the octave, unlike the clarinet, which rises in pitch by a twelfth when overblown. An instrument that overblows at the octave has identical fingering for both registers.
Sax created an instrument with a single-reed mouthpiece and conical brass body. Having constructed saxophones in several sizes in the early 1840s, Sax applied for, and received, a 15-year patent for the instrument on 28 June 1846. The patent encompassed 14 versions of the fundamental design, split into two categories of seven instruments each, and ranging from sopranino to contrabass. A limited number of instruments in the series pitched in F and C were produced by Sax, but the series pitched in E♭ and B♭ quickly became the standard. All the instruments were given an initial written range from the B below the treble staff to the E♭ one half-step below the third ledger line above staff, giving each saxophone a range of two and a half octaves. Sax's patent expired in 1866. Thereafter, numerous other instrument manufacturers implemented their own improvements to the design and keywork.
Sax's original keywork, which was based on the Triebert system 3 oboe for the left hand and the Boehm clarinet for the right, was simplistic and made certain legato passages and wide intervals extremely difficult to finger; that system was later improved with extra keys, linkage mechanisms, and alternate fingerings.
Early in the development of the saxophone the upper keyed range was extended to E, then to F above the staff; 1880s era sheet music for saxophone was written for the range of low B to F. In 1887 the Buffet-Crampon company obtained a patent for extending the bell and adding an extra key to extend the range downwards by one semitone to B♭. This extension is standard in modern designs, with the notable exception of baritone saxophones which have keys down to low A. The upper range to F remained the standard for nearly a century until a high F♯ key became common on modern saxophones.
In the 1840s and 1850s, Sax's invention gained use in small classical ensembles (both all-saxophone and mixed), as a solo instrument, and in French and British military bands. Saxophone method books were published and saxophone instruction was offered at conservatories in France, Switzerland, Belgium, Spain, and Italy. By 1856 the French Garde Republicaine band was the largest ensemble of its time to prominently feature the instrument, using eight saxophones. The saxophone was used experimentally in orchestral scores, but never came into widespread use as an orchestral instrument. In 1853-54 the orchestra of Louis Antoine Jullien featured a soprano saxophone on a concert tour of the United States.
After an early period of interest and support from classical music communities in Europe, interest in the saxophone as a classical instrument waned in the late nineteenth century. Saxophone teaching at the Paris Conservatory was suspended from 1870 to 1900 and classical saxophone repertoire stagnated during that period. But it was during this same period that the saxophone began to be promoted in the United States, largely through the efforts of Patrick Gilmore, leader of the 22nd Regiment band, and Edward A. Lefebre, a Dutch emigré and saxophonist who had family business associations with Sax. Lefebre settled in New York in early 1872 after he arrived as a clarinetist with a British opera company. Gilmore organized the World Peace Jubilee and International Music Festival taking place in Boston that summer. The Garde Republicaine band performed and Lefebre was a clarinetist with the Great Festival Orchestra for that event. In the fall of 1873 Gilmore was reorganizing the 22nd Regiment band under the influence of the Garde Republicaine band and recruited Lefebre, who had established a reputation in New York as a saxophonist over the previous year. Gilmore's band soon featured a soprano-alto-tenor-baritone saxophone section, which also performed as a quartet. The Gilmore-Lefebre association lasted until Gilmore's death in 1892, during which time Lefebre also performed in smaller ensembles of various sizes and instrumentation, and worked with composers to increase light classical and popular repertoire for saxophone.
Lefebre's later promotional efforts were very significant in broadening adoption of the saxophone. Starting near the end of the 1880s he consulted with the brass instrument manufacturer C.G. Conn to develop and start production of improved saxophones to replace the costly, scarce, and mechanically unreliable European instruments that were in the American market. The early 1890s saw regular production of saxophones commence at Conn and its offshoot Buescher Manufacturing Company, which dramatically increased availability of saxophones in the US. Lefebre worked with the music publisher Carl Fischer to distribute his transcriptions, arrangements, and original works for saxophone, and worked with the Conn Conservatory to further saxophone pedagogy in the US. Lefebre's associations with Conn and Fischer lasted into the first decade of the twentieth century and Fischer continued to publish new arrangements of Lefebre's works after his death.
Early twentieth-century growth and development[]
While the saxophone remained marginal, used mainly as a novelty instrument in the classical world, many new musical niches were established for it during the early decades of the twentieth century. Its early use in vaudeville and ragtime bands around the turn of the century laid the groundwork for its use in dance orchestras and eventually jazz. As the market for saxophones grew in the US, the manufacturing industry grew. The Martin Band Instrument Company started producing saxophones between 1905 and 1912, and the Cleveland Band Instrument Company started producing saxophones under contract to the H. N. White Company in 1916. The saxophone was promoted for the casual market with introduction of the C soprano (slightly higher than the regular soprano) and C melody (between alto and tenor) saxophones, both pitched in C to enable them to play from piano music. Production of such instruments stopped during the Great Depression. During the 1920s the saxophone came into use as a jazz instrument, fostered by the influences of the Fletcher Henderson Orchestra and the Duke Ellington Orchestra. Starting in the late 1920s and early 1930s, the modern era of classical saxophone was launched largely through the efforts of Marcel Mule and Sigurd Raschèr, and the classical repertoire for the instrument expanded rapidly.
The use of the saxophone for more dynamic and more technically demanding styles of playing added incentive for improvements in keywork and acoustic design. Early saxophones had two separate octave keys operated by the left thumb to control the two octave vents required on alto or larger saxophones. Around the turn of the century, mechanisms were developed to operate both octave vents with a single key using the left thumb. Ergonomic design of keywork evolved rapidly during the 1920s and 1930s. The front F mechanism supporting alternate fingerings for high E and F, and a stack-linked G♯ key action, became standard during the 1920s, followed by improvements to the left hand table key mechanisms controlling G♯ and the bell keys. New bore designs during the 1920s and 1930s resulted from the quest for improved intonation, dynamic response and tonal qualities. The 1920s were also an era of design experiments like the Buescher straight altos and tenors, the King Saxello soprano, the C. G. Conn mezzo-soprano saxophone keyed in F, and the Conn-O-Sax saxophone–English horn hybrid.
French saxophonist and educator Jean-Marie Londeix greatly expanded the saxophone repertoire and available techniques in the second half of the 20th century, commissioning a great deal of new saxophone works with extended techniques, including those by Denisov, Lauba, Rossé, and Rolin.
Modern saxophone emerges[]
The modern layout of the saxophone emerged during the 1930s and 1940s, first with right-side bell keys introduced by C. G. Conn on baritones, then by King on altos and tenors. The mechanics of the left hand table were revolutionized by Selmer with their Balanced Action instruments in 1936, capitalizing on the right-side bell key layout. In 1948 Selmer introduced their Super Action saxophones with offset left and right hand stack keys. Thirty to forty years later this 1948 Selmer layout was nearly universal.
The high F♯ key was also first introduced as an option on the Balanced Action model, although it took several decades for it to gain acceptance because of perceived deleterious effects on intonation.
Marcel Mule established study of the saxophone as a classical instrument at the Conservatoire de Paris from the 1940s. Larry Teal did the same in the United States at the University of Michigan a decade later. A number of other American institutions have since become recognized homes for the study of classical saxophone. They include Northwestern University, Indiana University, and the Eastman School of Music.
Usage[]
In military bands[]
The saxophone first gained popularity in military bands. Although the instrument was initially ignored in Germany, French and Belgian military bands were quick to include it in their ensembles. Most French and Belgian military bands incorporate at least a quartet of saxophones, comprising an E♭ baritone, B♭ tenor, E♭ alto and B♭ soprano. These four instruments have proven the most popular of all Sax's creations with the E♭ contrabass and B♭ bass usually considered impractically large and E♭ sopranino insufficiently powerful. British military bands tend to include at minimum two saxophonists on alto and tenor.
In classical music[]
The saxophone was introduced into the concert band, which usually calls for an E♭ alto saxophone, a B♭ tenor saxophone, and an E♭ baritone saxophone. A concert band may include two altos, one tenor, and one baritone. A B♭ soprano saxophone is also sometimes used, and is played by the first alto saxophonist. A bass saxophone in B♭ is used in some concert band music (especially music by Percy Grainger).
Saxophones are used in chamber music, such as saxophone quartets and other chamber combinations of instruments. The classical saxophone quartet consists of a B♭ soprano saxophone, E♭ alto saxophone, B♭ tenor saxophone, and E♭ baritone saxophone (SATB). On occasion, the soprano is replaced with a second alto sax (AATB); a few professional saxophone quartets have featured non-standard instrumentation, such as James Fei's Alto Quartet (four altos).
There is a repertoire of classical compositions and arrangements for the SATB instrumentation dating back to the nineteenth century, particularly by French composers who knew Sax. However, the largest body of chamber works for saxophone are from the modern era of classical saxophone initiated by Marcel Mule in 1928. Sigurd Raschèr followed as a soloist in orchestral works, starting in 1931, and also figured prominently in development of modern classical saxophone repertoire. The Mule quartet is often considered the prototype for quartets due to the level of virtuosity demonstrated by its members and its central role in the development of modern quartet repertoire. However, organized quartets existed before Mule's ensemble, the prime example being the quartet headed by Edward A. Lefebre (1834–1911), which was a subset of Patrick Gilmore's 22nd Regiment band between 1873 and 1893.
In the 20th and 21st centuries, the saxophone found increased popularity in symphony orchestras. The instrument has also been used in opera and choral music. Musical theatre scores also can include parts for saxophone, sometimes doubling another woodwind or brass instrument.
In marching bands[]
The saxophone, is present in marching bands mainly in Europe and America. The saxophone is useful as a replacement when many brass instruments in a marching band are not present.
The Alto Saxophone section in the Spartan Marching Band is one of the two sections in the hornline that plays a woodwind instrument.
The Regal Accordion and Saxophone band distinguished itself from the many flute bands in Northern Ireland by their use of saxophones, helping them raise to popularity from the 1950s onwards. Popular personality, who taught Van Morrison how to play saxophone who saw him as a big inspiration and went on to become friends, George Cassidy was lead saxophonist in the marching band.
Setup[]
Generally speaking, the typical marching band setup for saxophone involves an closed tip mouthpiece with a 2.50-3.00 strength reed.
Marching Band Saxophone Mouthpieces[]
- Yamaha 4C
- Clark Fobes Debut
- Selmer C*
- Vandoren Optimum
Most players use a 2.50 or 3.00 in Classic or Signature to begin with for their marching needs.